* *

Picture Bit

            

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 23, 2024, 10:32:11 am

Login with username, password and session length

Members
Stats
  • Total Posts: 32006
  • Total Topics: 3964
  • Online Today: 146
  • Online Ever: 235
  • (December 09, 2019, 06:27:14 pm)
Users Online
Users: 0
Guests: 163
Total: 163
163 Guests, 0 Users

Author Topic: OZM swingarm cable routing question  (Read 7391 times)

Gregman

  • Novice
  • *
  • Posts: 22
  • Karma: 0
OZM swingarm cable routing question
« on: January 09, 2013, 01:12:47 pm »
I am taking apart and parting out my '99 OZM and before I pull the rear derailleur cable out thru the swingarm I want to make sure that there is either a tube that actually runs thru it or should I leave the old cable to attach and pull the new one thru?   I seem to recall on my old 1996 Animal that there was NO tube thru the swingarm and I had to fish thru a tube to guide the cable thru.

Thanks,
Greg

Old Proflexer

  • Guru
  • *****
  • Posts: 579
  • Karma: 9
Re: OZM swingarm cable routing question
« Reply #1 on: January 10, 2013, 09:39:42 am »
there is a plastic cable tube in there attached to the end guides - one of mine broke off a ways back and I used a wire coat hanger to restring my rear cable thru the arm.

if you're hesitant at all, it certainly wouldn't hurt to attach a strong thread of some sort to the end of the cable when you pull it out.
« Last Edit: January 10, 2013, 09:41:19 am by Old Proflexer »
Yeah, they don't make 'em anymore - it's a classic - - -

Gregman

  • Novice
  • *
  • Posts: 22
  • Karma: 0
Re: OZM swingarm cable routing question
« Reply #2 on: January 10, 2013, 11:45:07 am »
Thanks OP I appreciate the response.   

Its been years since I was last on this forum and I basically forgot about it as well as my OZM hanging from the ceiling.    Its a real shame that I never took advantage of my OZM as I gave up MTBing shortly after I built it up - pretty sad taking her apart I have to say - she is uber clean and not even a scratch.

fyrstormer

  • Guru
  • *****
  • Posts: 524
  • Karma: 3
Re: OZM swingarm cable routing question
« Reply #3 on: January 10, 2013, 11:51:56 am »
The carbon swingarms do have internal cable guides. The aluminum swingarms don't. It was not fun when I discovered this for the first time on my 756. Fortunately, it is possible to slide a bit of spare cable housing through the interior of the swingarm, using the cable itself as a guide, to make routing a new cable easier. (just make sure to remove the spare cable housing after the new cable is routed through the swingarm.)

I have to ask, why did you give up mountain biking? I can't really imagine any other kind of biking being half as fun. Road bikes are useless on the 99% of Earth's habitable land that isn't paved.
« Last Edit: January 10, 2013, 11:55:27 am by fyrstormer »

whisperdancer

  • Master
  • ****
  • Posts: 255
  • Karma: 2
  • Unusual 957...
Re: OZM swingarm cable routing question
« Reply #4 on: January 12, 2013, 02:59:35 pm »
Are you going to sell the frame separately from everything else?
Proflex '97 Animal with Carbon Swingarm & Crosslink Carbon fork
K2 1000 frame, Carbon Swingarm,Crosslink Carbon CS being worked to be a 957
Yeti ASR 5

Gregman

  • Novice
  • *
  • Posts: 22
  • Karma: 0
Re: OZM swingarm cable routing question
« Reply #5 on: January 13, 2013, 03:20:28 pm »
I have to ask, why did you give up mountain biking? I can't really imagine any other kind of biking being half as fun. Road bikes are useless on the 99% of Earth's habitable land that isn't paved.

I got bit by the road bug back in 2001 just after I built up the OZM.    I live in Downtown Chicago and I was getting tired of driving to  Kettle Moraine in Wisconsin or to Palos every weekend inorder to hit the dirt and eventually put 1" slicks on the OZM for the lakefront.   While the 1" tires made a HUGE difference a just had to build up a Road bike which wound up being the K2 MOD5 which I went thru two of those frames as well as some others.   I am selling off the OZM in parts inorder to fund a new bike build that I want to get complete before the spring.   

Gregman

  • Novice
  • *
  • Posts: 22
  • Karma: 0
Re: OZM swingarm cable routing question
« Reply #6 on: January 13, 2013, 03:24:36 pm »
Are you going to sell the frame separately from everything else?

Yes the frame separate from everything else - its a Medium

whisperdancer

  • Master
  • ****
  • Posts: 255
  • Karma: 2
  • Unusual 957...
Re: OZM swingarm cable routing question
« Reply #7 on: January 13, 2013, 03:48:26 pm »
Are you going to sell the frame separately from everything else?

Yes the frame separate from everything else - its a Medium

Bummer, not my size.
Proflex '97 Animal with Carbon Swingarm & Crosslink Carbon fork
K2 1000 frame, Carbon Swingarm,Crosslink Carbon CS being worked to be a 957
Yeti ASR 5

Gregman

  • Novice
  • *
  • Posts: 22
  • Karma: 0
Re: OZM swingarm cable routing question
« Reply #8 on: January 13, 2013, 08:24:01 pm »


Bummer, not my size.
[/quote]

It was never exactly my size either - was a tad too large for me since I am only 5'5 but K2 never made this frame in a small.   

I do have a damn good looking Carbon Crosslink w/smart shock that needs to go as well

Colin

  • Guru
  • *****
  • Posts: 1244
  • Karma: 14
  • in a village near Northampton, UK
Re: OZM swingarm cable routing question
« Reply #9 on: January 14, 2013, 01:10:19 am »
Hi Greg,
Where in the world are you located?

I'd prefer a Medium for my wife's Oz than the Large I have lined up for her.

I'm in the UK.

Col.
2001 OzM
2000 OzX
1999 x500
1999 900 Frame
1998 4000se
1998 4000
1997 957 Frame
1997 857 Frames
1997 XP-X (856)
1995/6 x55/x56 Frame
1992 962 Frame
1991 Marin Pine Mountain with a Flex Stem

kiwi

  • Guru
  • *****
  • Posts: 1871
  • Karma: 24
  • 756,wtb sstk,risse terminator, 97-carbon xlink,v's
Re: OZM swingarm cable routing question
« Reply #10 on: January 14, 2013, 01:47:03 am »
its better if the rear cable goes through the swingarm with out the stops.doing that elimnated ghost shifting on my 756(thats my input ;D)
kiwi proflex rider

Gregman

  • Novice
  • *
  • Posts: 22
  • Karma: 0
Re: OZM swingarm cable routing question
« Reply #11 on: January 14, 2013, 05:12:46 am »
Hi Greg,
Where in the world are you located?

I'd prefer a Medium for my wife's Oz than the Large I have lined up for her.

I'm in the UK.

Col.

I am in Chicago

whisperdancer

  • Master
  • ****
  • Posts: 255
  • Karma: 2
  • Unusual 957...
Re: OZM swingarm cable routing question
« Reply #12 on: January 14, 2013, 10:03:39 am »


Bummer, not my size.

It was never exactly my size either - was a tad too large for me since I am only 5'5 but K2 never made this frame in a small.   

I do have a damn good looking Carbon Crosslink w/smart shock that needs to go as well
[/quote]

I need a large frame. I'm around 6'3.
I already have the CF crosslink fork...

Hi Greg,
Where in the world are you located?

I'd prefer a Medium for my wife's Oz than the Large I have lined up for her.

I'm in the UK.

Col.

Are you thinking on selling it?  ;D
Proflex '97 Animal with Carbon Swingarm & Crosslink Carbon fork
K2 1000 frame, Carbon Swingarm,Crosslink Carbon CS being worked to be a 957
Yeti ASR 5

Spokes

  • Guru
  • *****
  • Posts: 981
  • Karma: 11
Re: OZM swingarm cable routing question
« Reply #13 on: January 14, 2013, 02:47:32 pm »


I'd prefer a Medium for my wife's Oz than the Large I have lined up for her.

Col.

Hey Col do you live anywhere near Welford? If you still fancy a swop I can bring my medium OZ up next time im visiting my mother/father inlaw and if we're both happy do an exchange?

Chris
4000
857
856's
OZx modern build
757
4500
957
955
5000
no room in big shed but always room for one more!

Colin

  • Guru
  • *****
  • Posts: 1244
  • Karma: 14
  • in a village near Northampton, UK
Re: OZM swingarm cable routing question
« Reply #14 on: January 15, 2013, 06:16:27 am »
Yes, let's do it.
PM'd ya!



I'd prefer a Medium for my wife's Oz than the Large I have lined up for her.

Col.

Hey Col do you live anywhere near Welford? If you still fancy a swop I can bring my medium OZ up next time im visiting my mother/father inlaw and if we're both happy do an exchange?

Chris
« Last Edit: January 17, 2013, 01:02:31 am by Colin »
2001 OzM
2000 OzX
1999 x500
1999 900 Frame
1998 4000se
1998 4000
1997 957 Frame
1997 857 Frames
1997 XP-X (856)
1995/6 x55/x56 Frame
1992 962 Frame
1991 Marin Pine Mountain with a Flex Stem