Author Topic: POST BUY SELL WANT,proflex and K2 finds here! (Read 444937 times)

fitzroybikeco · « **Reply #1470 on:** June 28, 2014, 09:07:22 pm »

no worries

karlf · « **Reply #1471 on:** August 17, 2014, 06:35:15 am »

Anyone interested in buying a complete ProFlex XP6 (856)? I think I'm going to have to sell it, so thought I'd post here before listing on Ebay. It's in fully rideable condition - I've had amazing fun with it - but I've just bought something newer that will be easier to maintain, and unfortunately I don't really have the space to keep both.

I bought it from a friend 2 years ago after it had sat in his spare room unused for a few years... the elastomers were rock solid so I replaced them with a spring at the rear, and an ODS damper & spring at the front (still have the old elastomer-compatible damper if anyone wanted to revert to it). It's had new SRAM cables all round this spring, plus new Michelin tyres. There are a few knocks to the paintwork but overall it's in pretty good condition - the most notable damage is a small dent in the top tube (you can see it just above the "X" in the 3rd photo below). Frame size is 18".

Bigger images are at https://www.flickr.com/photos/16397740@N05/sets/72157646140584210/

If you're interested or want to know more, please send me a PM on here!

Thanks

Karl

Jcshinkle · « **Reply #1472 on:** October 24, 2014, 09:49:42 pm »

Quote from: Friso on June 28, 2014, 01:01:03 pm

Hi Fitz,

I am looking for a Way Big frame, would you mind meassuring the center-crank to top-tube?
That way we can find out its size.
Thanks a lot, kind regards,

Friso

Mine is kind of buried in my shop, so it was awkward to reach and measure, but the Way Big measured about 21 - 22 inches from center-crank to top-tube.

BikerTrash · « **Reply #1473 on:** November 21, 2014, 06:44:50 pm »

Wanted to buy: Vintage Control Tech stem, ≤100mm, 1 1/8" steer, 1" handlebar, ≤5°. THANKS!

w2zero · « **Reply #1474 on:** December 02, 2014, 09:15:39 pm »

K2 Proflex OZ-M 5500 Carbon Fiber Seattle

Craigslist posting. Found this bit of carbon fiber
surfing today. http://seattle.craigslist.org/see/bik/4782319158.html

Spokes · « **Reply #1475 on:** December 11, 2014, 07:59:28 am »

If you had put the word Proflex in there just once I might have had a think but I recon you've joined the wrong forum.

Unless you've installed an engine in your bike? Now that would be worth seeing!

Chris

w2zero · « **Reply #1476 on:** December 11, 2014, 02:58:32 pm »

This is a bicycle forum so try posting your question on a car forum like..... http://www.carbdford.com and see if we can come up with something.

Jcshinkle · « **Reply #1477 on:** December 12, 2014, 08:44:04 am »

Found this in the Phoenix area. It is a Way Big 4000 and looks close to original.
http://phoenix.craigslist.org/nph/bik/4793794163.html

shedDY2001 · « **Reply #1478 on:** January 01, 2015, 11:47:23 am »

proflex bars,gripa and girving bar ends £10 posted to uk

Carbon_Angus · « **Reply #1479 on:** January 02, 2015, 10:10:57 am »

1999 k2 4000 here's my lisitng

http://monterey.craigslist.org/bik/4829090496.html

w2zero · « **Reply #1480 on:** January 02, 2015, 12:39:33 pm »

Cool. I used to go help my son's neighbor tune up masses of bikes to stuff into shipping containers for launching off to Africa. It was a matter of get as many as possible to function and send the rest as spare parts.

Colin · « **Reply #1481 on:** January 05, 2015, 10:18:40 am »

Quote from: Carbon_Angus on January 02, 2015, 10:10:57 am

1999 k2 4000 here's my lisitng

http://monterey.craigslist.org/bik/4829090496.html

FYI, that's a Small, not a Medium (can tell by the upper shock mount frame shape)
Actually it's a 4000RS I believe?
Nice bike and if it was in the UK, I'd be V. intrested for the missus, (The 900 that I have just sounds soooooo Lo-End! <GRIN>)

Good Luck !

Col.

Spokes · « **Reply #1482 on:** January 08, 2015, 03:01:51 pm »

If anyone fancys a 956 there is a really nice one on German EBay. If say its possibly one of the rarest 9's. You see plenty of 957's and quite a few 955's but it's only the second 956 I've see and one of those was a picture on here.

Chris

DugB · « **Reply #1483 on:** January 08, 2015, 03:07:41 pm »

It has the same prototype carbon rear swingarm as on my 956LE, but without the smoothed welds. Did all 956s have that same swingarm?

- Doug

Spokes · « **Reply #1484 on:** January 11, 2015, 02:36:13 pm »

Yes as far I know the 956 was the first to use this frame whilst the 856 still used the World Cup design. The carbon vector legs are pretty special. The '96 Proflex brochure shows it well. Obviously in '97 the frame became mainstream with the 757, 857 and 957 with a change to Crosslinks.

Chris

News:

Menu

Picture Bit

Author Topic: POST BUY SELL WANT,proflex and K2 finds here! (Read 444937 times)

karlf