Author Topic: POST BUY SELL WANT,proflex and K2 finds here! (Read 446178 times)

DugB · « **Reply #360 on:** October 26, 2008, 11:58:45 am »

Wow, thanks for posting that. Tho auction with the complete fork looks like it's for a Way Big fork, which is what I want so I can use the carbon legs on my 4000. I'll be bidding on that for sure.

- Doug

purple gerbil · « **Reply #361 on:** October 26, 2008, 01:38:56 pm »

the guy with the fork's also has a nice set of spinergy spoked wheel's........

Spokes · « **Reply #362 on:** October 27, 2008, 11:07:03 am »

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=260303595112
Polished Animal frame with carbon swing arm. Is this Orange's old one?

bigdee · « **Reply #363 on:** October 27, 2008, 11:52:02 am »

Hi peeps, has anyone in the uk got some 110bcd chainrings outer and middle, preferably in good cond.
cheers dave

orange · « **Reply #364 on:** October 27, 2008, 01:32:35 pm »

Quote from: Spokes on October 27, 2008, 11:07:03 am

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=260303595112
Polished Animal frame with carbon swing arm. Is this Orange's old one?

ha - I saw that, but no not mine. Was with my mate who has my old one and it's currently in his shed waiting to be built up soon!!

orange · « **Reply #365 on:** October 27, 2008, 01:37:42 pm »

I have 2 outer rings in 110 - both Shimano SG-X, one silver one black. The silver one's in slightly better nick than the black. £7 silver or £6 black posted?

purple gerbil · « **Reply #366 on:** October 27, 2008, 01:52:39 pm »

GT LTS
NOPE IT'S NOT A PRO-FLEX!!........BUT IF GOT FOR THE RIGHT PRICE..££££$$$$....THESE MAKE A NICE PLUSH RIDE....4" OR 5" OF ADJUSTABLE TRAVEL ALSO HEIGHT ADJUSTABLE..

http://cgi.ebay.co.uk/GT-LTS-1-16INCH-Mountain-bike-frame_W0QQitemZ300269027786QQihZ020QQcategoryZ22679QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

DugB · « **Reply #367 on:** October 27, 2008, 02:07:23 pm »

More Proflex ads from Criagslist:

http://portland.craigslist.org/clc/bik/894713674.html

http://denver.craigslist.org/bik/892970416.html

http://phoenix.craigslist.org/wvl/bik/894879206.html

http://seattle.craigslist.org/see/bik/892436601.html

http://dothan.craigslist.org/bik/859865945.html

http://sfbay.craigslist.org/nby/bik/893169214.html

http://worcester.craigslist.org/bik/883074029.html

Enjoy!

Simon · « **Reply #368 on:** November 01, 2008, 02:32:11 am »

I have a very good condition 855 main frame triangle (red)
I wish to sell for a nominal amount plus actual shipping costs.

Also an 855 swingarm which is also in good condition except the welded on strut mounts have been removed.
Again for a nominal mount plus shipping.

I also have some Vector2 fork legs with some bits of linkage,shafts and a Mula etc.
Again for nominal amount plus shipping.

FSA Ti platinum pro ISIS B/B 170g 113 X 73 very little use still in original packaging £20 + P&P

Original stem for a large 4500 £10 + P&P

New carbon swingarm for Oz 4500 5500 front plastic cable guide broken,pivot holes already reamed out for
my sealed bearing conversion £50 + P&P

Ritchey Ti clipless pedals (retro) all complete with cleats etc good condition with original box and instructions £15 + P&P

Simon.

Spokes · « **Reply #369 on:** November 01, 2008, 08:12:58 am »

I would like the stem and pedals if still available.
Cheers

DugB · « **Reply #370 on:** November 01, 2008, 08:45:38 am »

Simon, that OZ//4500/5500 rear swingarm will fit a 4000 as well, right? I'd be interested in that particularly because of the reaming you did (I don't have a reamer), but only if you machine me an aluminum spindle and the needed spacers (for which I'd pay extra). ;-) I have the bearings. I tried to do it myself but couldn't get my lathe to stop turning a slight taper :-/

Lemme know...

- Doug

Simon · « **Reply #371 on:** November 01, 2008, 09:16:33 am »

Quote from: DugB on November 01, 2008, 08:45:38 am

Simon, that OZ//4500/5500 rear swingarm will fit a 4000 as well, right? I'd be interested in that particularly because of the reaming you did (I don't have a reamer), but only if you machine me an aluminum spindle and the needed spacers (for which I'd pay extra). ;-) I have the bearings. I tried to do it myself but couldn't get my lathe to stop turning a slight taper :-/

Lemme know...

- Doug

Hi Doug
yes it will fit if yours is a bearing and bush type and not the later needle bearing type,though ironically it will fit the needle bearing one if it wasn't reamed out.

I'm sorry I can't do the shaft as I lost my engineer that did them for me, if I could I would.

Anyway there was a guy on this site recently who's an engineer maybe he could knock one up for you ??
All the drawings are available and with the right equipment very easy to make.

Simon.

DugB · « **Reply #372 on:** November 01, 2008, 09:28:33 am »

Hi Simon,

Let me print the drawings and talk to my local machine shop...I'm sure they can do the work, it just comes down to how much it will cost. I even have the 6061 bar stock...I just need the shaft and spacers. If their work wont be too expensive then I'll get back in touch with you.

Thanks,
- Doug :-)

Simon · « **Reply #373 on:** November 01, 2008, 09:41:12 am »

Quote from: DugB on November 01, 2008, 09:28:33 am

Hi Simon,

Let me print the drawings and talk to my local machine shop...I'm sure they can do the work, it just comes down to how much it will cost. I even have the 6061 bar stock...I just need the shaft and spacers. If their work wont be too expensive then I'll get back in touch with you.

Thanks,
- Doug :-)

No worries I hope it all works out for you

Simon · « **Reply #374 on:** November 02, 2008, 05:56:11 am »

Quote from: Spokes on November 01, 2008, 08:12:58 am

I would like the stem and pedals if still available.
Cheers

PM Sent

Simon

News:

Menu

Picture Bit

Author Topic: POST BUY SELL WANT,proflex and K2 finds here! (Read 446178 times)