Author Topic: POST BUY SELL WANT,proflex and K2 finds here! (Read 352784 times)

racesrc · « **Reply #1230 on:** February 10, 2012, 07:58:57 pm »

this also includes a new pair of the needle bearings for the pivot. and I think 350 sounds a little high, I can do 325 shipped.
DAVID

racesrc · « **Reply #1231 on:** February 11, 2012, 01:19:20 pm »

Sold.

David

mickstood · « **Reply #1232 on:** February 12, 2012, 01:37:19 pm »

Hi

Proflex 657 for sale on eBay:

http://www.ebay.co.uk/itm/280825400908?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649#ht_572wt_1139

Cheers

Mick

Thunderchild · « **Reply #1233 on:** February 13, 2012, 11:49:22 am »

http://www.ebay.com/itm/Risse-Genesis-rear-air-shock-for-1995-Proflex-K2-955-World-Cup-Design-MTB-frame-/320848188472?pt=Cycling_Parts_Accessories&hash=item4ab40ad438

Thunderchild

Colin · « **Reply #1234 on:** February 16, 2012, 07:27:28 am »

Quote from: Thunderchild on February 13, 2012, 11:49:22 am

http://www.ebay.com/itm/Risse-Genesis-rear-air-shock-for-1995-Proflex-K2-955-World-Cup-Design-MTB-frame-/320848188472?pt=Cycling_Parts_Accessories&hash=item4ab40ad438

Thunderchild

sounds like it, as he says it was off a 955.................

Col.

adm · « **Reply #1235 on:** February 16, 2012, 07:31:30 am »

Hello!

i am looking for a replacement noleen rear shock for my 957/857.

i am also in need off the small fixture which connects to the upper fork which the noleen shock screws into.

an issue with the threading of the shock into this fixture caused a total failure of the noleen shock

i'm not really interested in investing the 200$ for a new risse shock - but any other reasonably replacements would be considered!

is there a way to make the nr4 style noleen shock (shown above in "racesrc's" post) fit/work with a 957/857? or will i need the exact noleen that was used in my frame prior?

please pm me!

thanks guys!

-a

Colin · « **Reply #1236 on:** February 17, 2012, 04:17:09 pm »

Quote from: adm on February 16, 2012, 07:31:30 am

Hello!

i am looking for a replacement noleen rear shock for my 957/857.

i am also in need off the small fixture which connects to the upper fork which the noleen shock screws into.
- look at the exploded diagram for your fork or frame and list the part you are after and this question will then be clearer to us
an issue with the threading of the shock into this fixture caused a total failure of the noleen shock

i'm not really interested in investing the 200$ for a new risse shock - but any other reasonably replacements would be considered!

is there a way to make the nr4 style noleen shock (shown above in "racesrc's" post) fit/work with a 957/857? or will i need the exact noleen that was used in my frame prior?
- a) No it will not fit the x57 frame, b) you need one with a split collet taper and end bolt

please pm me!

thanks guys!

-a

adm · « **Reply #1237 on:** February 18, 2012, 12:56:10 pm »

Hey Colin,

thanks for the clarification.

my bike is an 856 - what i need is an nr1 / nr2 rear shock with the cone shaped end... i have the split collet taper piece that feeds into the cone shaped strut.

either that, or a cone to eye adapter

please PM or email me ( adam@blackwhitegreyandbrwon.com ) with any available cone-ended shocks!

additionally - i have an extra rear strut and control arm off of an 856 for sale or trade if anyone is looking...

cheers,
-a

DugB · « **Reply #1238 on:** February 27, 2012, 07:28:31 am »

Hey all,

I'm looking for a set of the black rubber buttons that later Crosslink's used to prevent the top linkage bolts from denting the frame's top tube. Anyone have a set they don't mind parting with?

Thanks!
- Doug

shovelon · « **Reply #1239 on:** February 27, 2012, 08:43:41 am »

Quote from: DugB on February 27, 2012, 07:28:31 am

Hey all,

I'm looking for a set of the black rubber buttons that later Crosslink's used to prevent the top linkage bolts from denting the frame's top tube. Anyone have a set they don't mind parting with?

Thanks!
- Doug

Are you sure they are rubber? I thought they were plastic.

Terry

DugB · « **Reply #1240 on:** February 27, 2012, 10:29:25 am »

Well, I thought they would be made of some soft material...doesn't really make sense to have a hard object covering another hard object :-/

- Doug

Spokes · « **Reply #1241 on:** February 28, 2012, 01:12:55 pm »

Ive got them on my 857. They are a moulded item which looks like plastic. There is a little bit of give in it but its not a soft rubber buffer, more of a hard rubber/soft plastic type of material.

How about some wiring grommets for time being?

Chris

DugB · « **Reply #1242 on:** February 28, 2012, 01:50:36 pm »

I'm gonna hit the local Home Depot to see if they have anything softer...if I find something I'll pick up a bunch and send a pair to whomever wants some. Cuz, you know, it's time for you all to collectively "get a pair", hehehe :-) Seriously, though, the clear hockey tape wrapped around the 956LE's top tube isn't doing anything for its looks.

- Doug :-)

Spokes · « **Reply #1243 on:** February 29, 2012, 01:53:12 pm »

I feel your pain!

Off topic..Doug I've just picked up a '49 & a '52 BSA B31. No pedles but a hole lot of fun!

Chris

DugB · « **Reply #1244 on:** February 29, 2012, 05:18:37 pm »

Awesome! Is that a girder fork bike? I love those old BSAs...a friend of mine had a '52 Golden Flash and it was gorgeous! Seeing his shed, with that BSA and a Royal Enfield Interceptor, plus all his other rides, was eye opening to say the least!

Best of luck with it!
- Doug :-)

News:

Menu

Picture Bit

Author Topic: POST BUY SELL WANT,proflex and K2 finds here! (Read 352784 times)