Author Topic: Evo with Rear Pearl Shock (Read 3743 times)

Thunderchild · « **on:** November 10, 2008, 09:52:01 pm »

Anyone have any experience or eard of anything about the Rock Shox Pearl Rear shock. The mtbr.com rating is 4.5. See the images below. Dosen't look like the frame was modified.

Here is the Ebay link
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=290273616600

Thunderchild

Colin · « **Reply #1 on:** November 11, 2008, 05:18:03 am »

Hmmmm, yes, and they do it in a 215mmX63mm (8.5"X2.5") size which would be pretty cool on an Evo/Oz

But I think it might be an older shock? (not currently listed on website....) but the others also look good.

just been added to my shopping list..............

Col.

Thunderchild · « **Reply #2 on:** November 11, 2008, 04:05:10 pm »

I was able to find the tech manual on the Pearl on the Sram/Rock Shox website. http://www.sram.com/_media/techdocs/06RearCombo_English.pdf It must be a 2006 model. Just got the notice that the bike shipped.

Thunderchild

Colin · « **Reply #3 on:** November 13, 2008, 06:00:44 am »

Aaaah Good, so you've bought it then?

That'll be good to get some first hand experience of another alternative shock.

Well done.

Col

Interesting quote from the Pearl manual:
RIDING A BIKE IS DANGEROUS.
NOT PROPERLY MAINTAINING OR INSPECTING YOUR BIKE IS EVEN MORE DANGEROUS.
IT’S ALSO DANGEROUS NOT TO READ THESE INSTRUCTIONS.

Great!

Thunderchild · « **Reply #4 on:** November 13, 2008, 12:21:49 pm »

Yeah, I needed an Evo with an aluminum swing arm for a project bike. Did I say, "need." O. K. wanted. I will mount the shock on my Oz to check for fit as well.

Thunderchild

Colin · « **Reply #5 on:** November 14, 2008, 06:47:41 am »

Quote from: Thunderchild on November 13, 2008, 12:21:49 pm

Yeah, I needed an Evo with an aluminum swing arm for a project bike. Did I say, "need." O. K. wanted. I will mount the shock on my Oz to check for fit as well.

Thunderchild

There is only NEED where bikes are concerned! <GRIN>

Good Man! Report back on the Oz fitment!

Col.

IMO · « **Reply #6 on:** November 15, 2008, 07:32:53 am »

RS Pearl will NOT fit onto an unmodified OZ frame

Been there , tried that .

Thunderchild · « **Reply #7 on:** December 17, 2008, 09:44:29 pm »

No, IMO, I do not doubt you, but I still had to try and put the Pearl on my Oz. It came really close. When I removed it from the Evo, I found that the previous owner had modified, not the frame, but the shock. A little bit was grounded off. It doesn't affect the shock at all, and it fits the Evo. Maybe I can remove a bit more, then a bit more and a bit more........

THunderchild

shovelon · « **Reply #8 on:** December 19, 2008, 08:23:14 am »

I ground a flat onto my Swinger where it contacted the rib/seam on the downtube of my Oz. Needed about 1/16 inch. No problems.

News:

Menu

Search

Picture Bit

User

Stats

Members

Stats

Users Online

Online