Author Topic: Critical measurement (Read 6635 times)

Spokes · « **on:** February 23, 2008, 02:11:40 pm »

Can anyone tell me the critical measrement of std Girvin elite forks. Looked in the 'How Tos' and it shows 163mm for Noleen Cross links. Is it the same measurement for the elite?

Mr752 · « **Reply #1 on:** February 23, 2008, 02:35:25 pm »

Pretty sure its the same irregardless of which crosslink model it is other than the actual size of fork S,M or L

kiwi · « **Reply #2 on:** February 23, 2008, 03:24:04 pm »

the critical measurement is actually the distance between your crotch and the top tube

the girvin crosslink has a slightly smaller CM 152 mm i think,same as the vectors.If you look in the earliest nollen crosslink manual i think there is a reference to different bikes at the end,and thats also where the reference is to the smaller CM.The nolleen crosslinks grew a little bit to accomodate the smartshocks.

Spokes · « **Reply #3 on:** February 23, 2008, 04:33:31 pm »

Ive just read it properly and for the 2000 and 3000 its 153mm. Thank you all.

kiwi · « **Reply #4 on:** February 23, 2008, 05:23:36 pm »

Quote from: Spokes on February 23, 2008, 04:33:31 pm

Ive just read it properly and for the 2000 and 3000 its 153mm. Thank you all.

the 2000 and 3000 were atually the 857 and 957 "re badged" for 1998 so they retained the girvin crosslink albeit relabelled as noleens....Does this mean you dont need my vectors?

Spokes · « **Reply #5 on:** February 23, 2008, 05:52:17 pm »

No ill still have them for my 856.

kiwi · « **Reply #6 on:** February 23, 2008, 09:58:13 pm »

prolly beating a dead horse here but in 98 all the crosslinks were labelled noleen but some were actually girvins....not sure how you tell the difference if they have been de or re labbelled.I think there may be some differences in the shape of the ulm but cant be sure.

orange · « **Reply #7 on:** February 24, 2008, 12:29:34 am »

the only difference I noted between my Girivin crosslinks and my Noleen ones were that the Girvin ones had a stop/guide for canti brakes and the Noleen didn't.

kiwi · « **Reply #8 on:** February 24, 2008, 12:43:09 am »

if you have both ed (both stds i assume) yu can measure the distance between the top and lower mount of the links to the legs...I think the noleen is slightly longer there to aloow the smarts to fit.

orange · « **Reply #9 on:** February 24, 2008, 04:07:10 am »

no longer have them :-(

Mr752 has the Girvin ones though :-)

Mr752 · « **Reply #10 on:** February 24, 2008, 04:17:20 am »

The dimension btween the 2 pivots(upper and lower) on the fork leg is 130mm +/- 1-2mm.
Suppose you could PM Bohngy or "ASK THE SELLER A QUESTION" on his ebay sale for the Noleens!

Mr752

orange · « **Reply #11 on:** February 24, 2008, 07:44:56 am »

I'm just trying to remember if it was Bohngy I sold my Noleens to...?

kiwi · « **Reply #12 on:** February 25, 2008, 12:08:46 am »

Quote from: Mr752 on February 24, 2008, 04:17:20 am

The dimension btween the 2 pivots(upper and lower) on the fork leg is 130mm +/- 1-2mm.
Suppose you could PM Bohngy or "ASK THE SELLER A QUESTION" on his ebay sale for the Noleens!

Mr752

thats the same as the vectors of my 756.

Mr752 · « **Reply #13 on:** February 26, 2008, 06:40:59 am »

Orange,
Were many of the Noleen labelled Crosslinks finished in white?

orange · « **Reply #14 on:** February 26, 2008, 10:53:53 am »

there was a rash of them on Ebay a year or so back from ediscountbikes.com or somesuch site. I haven't seen many others, but they are out there, they do come up reasonably regularly on Ebay.

News:

Menu

Picture Bit

Author Topic: Critical measurement (Read 6635 times)