* *

Picture Bit

            

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 22, 2024, 10:30:31 am

Login with username, password and session length

Members
Stats
  • Total Posts: 32006
  • Total Topics: 3964
  • Online Today: 161
  • Online Ever: 235
  • (December 09, 2019, 06:27:14 pm)
Users Online
Users: 0
Guests: 204
Total: 204
204 Guests, 0 Users

Author Topic: Spring rate for EVO ?  (Read 2891 times)

J_Olson

  • Novice
  • *
  • Posts: 1
  • Karma: 0
  • I love YaBB 1G - SP1!
Spring rate for EVO ?
« on: February 28, 2003, 03:10:40 pm »
Just curious, but what spring rate are others using?

I just recieved my new Risse Jupiter 5R today,

Bike: 2000 EVO 3.0 (Supergo special)

Spring: 600#

Weight: 175#

Thanks.




Andy

  • Novice
  • *
  • Posts: 49
  • Karma: 0
    • My K2
Re: Spring rate for EVO ?
« Reply #1 on: March 03, 2003, 12:25:02 am »
First my weight is about 190-195lbs. (too much good  [smiley=beer.gif])

This is strange, but on my Noleen NR2 I had a 550lb spring. I also had a 600lb. Titanium spring but it made the rear to stiff (I hated the fact that I couldn't use the Ti and get the ride I wanted :()

Since getting a one of those 8.5" Fox Vanilla RC (from Supergo.com) I have used the 400lb. spring to get the same feel that I had with the NR2. I tried running it with the compression all the way off, but still need a 400lb spring. I did buy a 500lb. fox sping for the Vanilla but it made it too stiff???

I don't know why I would need such a lighter spring on the fox, is it the fact that it is .25" longer than the NR2?  or, is the compression on the Fox that much greater to make up the difference?

I don't know, but those are the facts.