* *

Picture Bit

            

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 23, 2024, 06:50:57 pm

Login with username, password and session length

Members
Stats
  • Total Posts: 32006
  • Total Topics: 3964
  • Online Today: 146
  • Online Ever: 235
  • (December 09, 2019, 06:27:14 pm)
Users Online
Users: 0
Guests: 131
Total: 131
131 Guests, 0 Users

Author Topic: Noleen NR4  (Read 2470 times)

Proflexman

  • Journeyman
  • ***
  • Posts: 125
  • Karma: 0
Noleen NR4
« on: June 17, 2003, 07:29:21 am »
I have one of these on my beastie boy however when i bought it i did not know at what setting it should be at.
So i downloaded a tech sheet from the K2 site and when i phoned CVI up and said that i thought i had the wrong spring they explained i had calculated it wrong and told me to do it their way so i did however my local shop said no that is wrong.
So what do i do who's advice do i take.
The rear spring is a NR 175-600 and i weigh in at 15 stone or 210 pounds.
I measured the length of the spring with it only just nipped up and without anything on the bike and then i had someone measure it whilst i was sitting on it and then i calculated the diff between the two and the sag was 25 mm.
Can anyone surgest what i should do as i feel the spring i have is too light for me.

Simon

  • Guru
  • *****
  • Posts: 1447
  • Karma: 7
  • Proflex and K2 biker
Re: Noleen NR4
« Reply #1 on: June 17, 2003, 09:05:52 am »
Definitely go with CVI's advice, they specialise with noleen and K2 products, and they always get excellent reviews in mag reports, they also let you  try a spring and if your not happy they will refund you or  let you try another until your happy can't say fairer than that.Simon. P.S you should be running 8mm sag measured at the shock (20% of the shock shaft stroke) with very little pre-load, your spring seems to be to soft.[smiley=laughing.gif]  
« Last Edit: June 17, 2003, 09:14:02 am by Simon »
856 FAUX BAR,Fox float,formula B4, Hope Ti,Raceface,FSA ISIS Ti,WTB Ti,Mega-air,XTR,Easton ct2,Easton monkey lite SL,Easton EA50,Goodridge Hoses,Eggbeaters,Ti bolts,DT swiss,

Old Proflexer

  • Guru
  • *****
  • Posts: 579
  • Karma: 9
Re: Noleen NR4
« Reply #2 on: June 17, 2003, 03:14:40 pm »
190 - 230 pounds in body weight shows a 700 lb spring rate for the beast

OP
Yeah, they don't make 'em anymore - it's a classic - - -

Scott

  • Master
  • ****
  • Posts: 398
  • Karma: 0
  • I love YaBB 1G - SP1!
Re: Noleen NR4
« Reply #3 on: June 18, 2003, 05:01:00 am »
My guess is that the K2 spring rates are set to control "bob" rather than give the best overall ride-in other words they went stiffer than required in order to keep riders/writers from too much mention of K2 bobbing.  Unless you're an XC racer type I'd go with the lighter spring if you're close to suggested max/min.

Along the same lines K2 said one years lineup had 4 point something inches of rear travel when the actually had 5.  This was because industry/magazine thinking was that 5 was too much for efficient trail bikes.
Scott
Pittsfield, Massachusetts
K2 Oz
K2 5000
Extralite F1 (sub 20lb FS)
Trek 1000 road

Proflexman

  • Journeyman
  • ***
  • Posts: 125
  • Karma: 0
Re: Noleen NR4
« Reply #4 on: June 20, 2003, 09:49:41 am »
 :PI contacted CVI about the rear shock and on their advice i bought a 750 spring.
Its now fitted to the bike and the rear end is alot better, firmer though i have to try it out on repetitive fast bumps to see how things are.
Otherwise i can recomend speaking to CVI about your shocks, any shocks.
 [smiley=nod.gif]