* *

Picture Bit

            

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 27, 2024, 02:29:30 pm

Login with username, password and session length

Members
Stats
  • Total Posts: 32006
  • Total Topics: 3964
  • Online Today: 20
  • Online Ever: 235
  • (December 09, 2019, 06:27:14 pm)
Users Online
Users: 0
Guests: 12
Total: 12
12 Guests, 0 Users

Author Topic: any 8 speed 34 tooth shimano available?  (Read 4470 times)

Carbon_Angus

  • Guru
  • *****
  • Posts: 926
  • Karma: 2
  • I am full of Bull
any 8 speed 34 tooth shimano available?
« on: August 26, 2008, 12:24:53 pm »
i am fiding my arse needs the extra and i want to keep it 24 speed

shovelon

  • Global Moderator
  • Guru
  • *****
  • Posts: 2229
  • Karma: 16
  • Down there? DOWN THERE!???
Re: any 8 speed 34 tooth shimano available?
« Reply #1 on: August 26, 2008, 03:47:02 pm »
Shimano made an STX-RC model in 8speed 11-34, back in the 90s.

Action Tec, and Cycle Dynamics make a 34 up to 38 cogset. You could buy just a 34 or bigger, and remove a cog from your existing set, you have it. You will have have to machine a tad off your carrier if you are using that type. Any machine shop can chuck in a lathe and trim off.

What cogset are you now running?


OzM,(Ozzie)
K24000,(Red)
957small,(Shorty)
957Large,(Monty)
956 LE,(Peirce)    <Sold>
Offroad "Proflex" (Serrota),
Serotta CST  titanium softail
McMahon FS

kiwi

  • Guru
  • *****
  • Posts: 1871
  • Karma: 24
  • 756,wtb sstk,risse terminator, 97-carbon xlink,v's
Re: any 8 speed 34 tooth shimano available?
« Reply #2 on: August 27, 2008, 01:50:20 am »
trouble is with these big cogs is you get big jumps in the ratios...
kiwi proflex rider

shovelon

  • Global Moderator
  • Guru
  • *****
  • Posts: 2229
  • Karma: 16
  • Down there? DOWN THERE!???
Re: any 8 speed 34 tooth shimano available?
« Reply #3 on: August 27, 2008, 08:00:53 am »
trouble is with these big cogs is you get big jumps in the ratios...
My wife's 957 has the big jump on the 34th cog. It shifts just fine.
OzM,(Ozzie)
K24000,(Red)
957small,(Shorty)
957Large,(Monty)
956 LE,(Peirce)    <Sold>
Offroad "Proflex" (Serrota),
Serotta CST  titanium softail
McMahon FS

Colin

  • Guru
  • *****
  • Posts: 1244
  • Karma: 14
  • in a village near Northampton, UK
Re: any 8 speed 34 tooth shimano available?
« Reply #4 on: August 27, 2008, 11:02:04 am »
I run a Shimano HG40 "Megarange" 11-34 8 Speed on my 4000se. (22/34/44 on front).



That's pretty low end Shimano kit, "Acera" I think, and I was a bit loath to put one on my XT spec'd bike, but it has always worked well and changed quickly (even the last "big" jump) and wore very well as well, and finally, they're very cheap! (£13!)

I guess I'd probably not notice the difference using a 11-32 HG50 STX-RC cassette, so maybe I'll try one of them next.

Col.

2001 OzM
2000 OzX
1999 x500
1999 900 Frame
1998 4000se
1998 4000
1997 957 Frame
1997 857 Frames
1997 XP-X (856)
1995/6 x55/x56 Frame
1992 962 Frame
1991 Marin Pine Mountain with a Flex Stem

Carbon_Angus

  • Guru
  • *****
  • Posts: 926
  • Karma: 2
  • I am full of Bull
Re: any 8 speed 34 tooth shimano available?
« Reply #5 on: August 28, 2008, 11:12:15 am »
Shimano made an STX-RC model in 8speed 11-34, back in the 90s.

Action Tec, and Cycle Dynamics make a 34 up to 38 cogset. You could buy just a 34 or bigger, and remove a cog from your existing set, you have it. You will have have to machine a tad off your carrier if you are using that type. Any machine shop can chuck in a lathe and trim off.

What cogset are you now running?




the 10 year-old XTR with a 28 as the largest

shovelon

  • Global Moderator
  • Guru
  • *****
  • Posts: 2229
  • Karma: 16
  • Down there? DOWN THERE!???
Re: any 8 speed 34 tooth shimano available?
« Reply #6 on: August 28, 2008, 12:50:08 pm »
Shimano made an STX-RC model in 8speed 11-34, back in the 90s.

Action Tec, and Cycle Dynamics make a 34 up to 38 cogset. You could buy just a 34 or bigger, and remove a cog from your existing set, you have it. You will have have to machine a tad off your carrier if you are using that type. Any machine shop can chuck in a lathe and trim off.

What cogset are you now running?




the 10 year-old XTR with a 28 as the largest
Wow, 28 tooth. I would die pushing that one. Why not a 32 tooth. There are tons of SRAM ones cheap.
OzM,(Ozzie)
K24000,(Red)
957small,(Shorty)
957Large,(Monty)
956 LE,(Peirce)    <Sold>
Offroad "Proflex" (Serrota),
Serotta CST  titanium softail
McMahon FS

Colin

  • Guru
  • *****
  • Posts: 1244
  • Karma: 14
  • in a village near Northampton, UK
Re: any 8 speed 34 tooth shimano available?
« Reply #7 on: August 29, 2008, 02:39:38 am »
Here's what looks like an HG40 11-34 on eBay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250287894502&ssPageName=ADME:B:SS:GB:1123



Maybe a trifle expensive...?

Col.
2001 OzM
2000 OzX
1999 x500
1999 900 Frame
1998 4000se
1998 4000
1997 957 Frame
1997 857 Frames
1997 XP-X (856)
1995/6 x55/x56 Frame
1992 962 Frame
1991 Marin Pine Mountain with a Flex Stem

shovelon

  • Global Moderator
  • Guru
  • *****
  • Posts: 2229
  • Karma: 16
  • Down there? DOWN THERE!???
Re: any 8 speed 34 tooth shimano available?
« Reply #8 on: August 29, 2008, 08:15:58 am »
OzM,(Ozzie)
K24000,(Red)
957small,(Shorty)
957Large,(Monty)
956 LE,(Peirce)    <Sold>
Offroad "Proflex" (Serrota),
Serotta CST  titanium softail
McMahon FS