Author Topic: Whats it worth,Oz carbon arm,modified,brand new. (Read 4189 times)

Simon · « **on:** April 05, 2006, 10:47:05 am »

Got a brand new carbon s/arm for a 4500 5500 Oz
never used,
pivot is already reamed out for my sealed bearing conversion (you all know about that,I've been sending a load of out details and drawings resently so there may be quite afew around now),
also with the s/arm a through shaft and the required shims,all that would be required are the 4 bearings,
easily found at a local bearing supplier and 2 hex flanged M8 X 20 or 25 bolts,
whats it worth anyone interested.

Simon.

PS Still got loads of bits and bobs if anyones interested,vector fork parts,855 main frame etc.

Carbon_Angus · « **Reply #1 on:** April 05, 2006, 11:41:48 am »

damn are you "parting" ways with us, Simon

[smiley=worry.gif]

Simon · « **Reply #2 on:** April 05, 2006, 06:01:38 pm »

Quote

damn are you "parting" ways with us, Simon

[smiley=worry.gif]

Ohh Noooooooo

just got these parts lying around and need some space,
still got 3 Proflexes (no one wanted one when offered
for sale

so suppose gonna keep them [smiley=laughing.gif])

Simon.

jeffhop · « **Reply #3 on:** April 06, 2006, 01:43:32 am »

id be interested as long as ive got some money left when i finally get some new forks which should be by this weekend. how much you want simon? oh yeah hows the whyte?

Simon · « **Reply #4 on:** April 07, 2006, 01:22:43 am »

Quote

id be interested as long as ive got some money left when i finally get some new forks which should be by this weekend. how much you want simon? oh yeah hows the whyte?

How does £65 plus postage sound,
offered to you first,
the Whyte is fantastic but in bits,just putting all back together but you don't want the hear all about that

Simon.

Matno · « **Reply #5 on:** April 07, 2006, 04:31:27 am »

Quote

the Whyte is fantastic but in bits,just putting all back together but you don't want the hear all about that

Simon.

Some of us DO want to hear about that... Sounds like a good story!

Simon · « **Reply #6 on:** April 07, 2006, 06:29:32 am »

Quote

Some of us DO want to hear about that... Sounds like a good story!

Oh Okay but don't blame me for boring you all with an off topic subject

,
Terry already knows the basic score here

but this is the full story.

First the Maverick front hub had a fair bit of play in it,
hadn't even riden it yet,contacted ATB the UK Whyte
supplier,next day new bearings arrived,when I went to fit them I found the problem was the axle
incorrectly machined,contact ATB again next day a new axle arrives,measured it same fault,

in the meantime

whilst admiring my bike I noticed one side of
the monocoque down near the front s/arm pivot appeared
to be dented or distorted,so contacted ATB again,thats not right take to your dealer and they will sort it and will also checkout the front hub,
so of to dealer (140mile round trip),
few days later the bikes ready,new frame and the play
in the hub sorted with a temp fix as ATB are awaiting
new axles to come in,appears to of been a faulty batch,
pick up bike very happy UNTIL
started fitting the customary cable rub patches I
notice a small flaw one side of the top tube,okay pretty minor but even my wife could see what I was getting at,I'm very anal when it comes to my bikes
they have to be perfect

if I'd come off and scratched it or something then thats fine,but not when its brand new,
so contact ATB again,explain the fault and my desire not to have to travel to the dealer again (to far),
they say if I'm comfortable stripping it and boxing it up
they will collect and deliver from my home,
next day they collect it and 48hrs later (today) another new frame arrived this one is spot on even came
with a new set of cranks and not the used ones I'd
sent back with it (haven't yet got the hollowtech tool),
so VERY happy now and extremly impressed with the
warranty service just a shame quality inspection let
things down, monocoques are notoriously difficult to
manufacture and easily subjectable to distortion etc during manufacture,however this does appear to be
abit of a one off as I've contacted quite afew other owners and no one else appears to of had any issues
or I'm just way to fussy [smiley=laughing.gif]
anyway do I regret my purchase,like HELL it such
a pleasure putting back together and can't wait to get another ride in.

Simon.

orange · « **Reply #7 on:** April 07, 2006, 06:49:24 am »

good to hear a positve customer services experience these days...

Matno · « **Reply #8 on:** April 07, 2006, 07:30:50 am »

Yes, that's a good outcome. Glad it worked out in the end. My Proflex 5000 came with the seat tube welded too low (it didn't even stick up above the seat "mast" high enough to fit the factory seat tube collar!) I was too excited to wait a few more weeks for Supergo to ship me a replacement, so I just ground it down (the weld was particularly thick, and I was careful not to create any stress risers). Still looks a little funny having exposed aluminium in the midst of all that yellow, but I don't really notice it much. The kicker was that I replaced the stock collar with a QR one shortly thereafter, and it would have fit without modification! Oh well...

shovelon · « **Reply #9 on:** April 07, 2006, 04:49:31 pm »

Quote

good to hear a positve customer services experience these days...

Yes, that is great customer service! But it is all worth it in the end.

Terry

jeffhop · « **Reply #10 on:** April 08, 2006, 09:25:16 am »

£65 inc p&p you got a deal.

Simon · « **Reply #11 on:** April 08, 2006, 09:46:29 am »

Quote

£65 inc p&p you got a deal.

I'll check postage costs to see what it comes out at first.

Simon.

Simon · « **Reply #12 on:** April 21, 2006, 07:50:34 am »

Still for sale if anyone's interested

jeffhop · « **Reply #13 on:** April 21, 2006, 08:36:54 am »

sorry simon guess ive let you down on this one, been having a few problems that hopefully should be sorted now, if the bike i have for sale goes at the weekend i might still have it but ive got to cut down on the amount of bikes i have. once again sorry. jeff

Simon · « **Reply #14 on:** April 21, 2006, 10:50:26 am »

No worries Jeff

just keeping it in the loop
for the mo

Simon.

News:

Menu

Picture Bit

Author Topic: Whats it worth,Oz carbon arm,modified,brand new. (Read 4189 times)