Iron Horse contact for K2 proflex parts Sticky

[Bruce]

Tom B.
Iron Horse Bikes & K2 Bikes
Warranty, Customer Service & Tech. Support
tomb@ironhorsebikes.com
1-800-645-5477 ext:214

[Bruce]

Here's the latest from Iron horse...Line up and place your orders now! Who nows what they will have in stock in the future.

Bruce
Ok I have all the parts you are looking for. The price's are as follows:
RK006-$7.95
Rk004-$7.95
Rk002-$14.95
14492- $9.95
We accept visa or master card. Feel free to call me to place the order: 1-800-645-5477 x214
Thanks,
Tom B.
Iron Horse Bikes & K2 Bikes
Warranty, Customer Service & Tech. Support
tomb@ironhorsebikes.com
1-800-645-5477 ext:214

[disco magic]

Reply from Tom at Iron Horse to my request for Evo Pivot Kit.

Thanks for the email. We do have the Rk012 pivot kits in stock. The cost is $16.95 + shipping. We will be stocking these parts until our supply runs out.
Thanks,
Tom B.
Iron Horse Bikes & K2 Bikes
Warranty, Customer Service & Tech. Support
tomb@ironhorsebikes.com
1-800-645-5477 ext:214


Note the final sentence "UNTIL OUR SUPPLY RUNS OUT"!

Time to stock up  

[kiwi]

those are kits for fork bearings, fame pivots etc.The elastomers you need are available form iron horse too.Email tom telling him what you need.If you get stuck post back.The front and rear elastomers are slightly different,i am not 100 per cent sure what iron horse actually have.

[shovelon]

I ordered front elastomer for my carbon vector fork to use while I tune a risse genisis.

While the rear elastomers are out for good, except for 120 lb riders, I was able to order front for a  190 rider.

CAUTION!!!!!!  Unless I gained 100 lbs, they sent me the wrong set. I am getting 50% sag.

Terry

[shovelon]

Update 10-3-06

I called Tom @ Iron Horse for stronger front elastomers. Somehow they sent medium elastomers for up to 150 lb riders. The reason is that they are out completely of hard to extra hard completely and have no plans to restock.

The only parts now for any X57 bike are swingarm pivot bushing kits.

Terry

[Carbon_Angus]

So no hangers?
No k2 parts?
They never did have any Noleen fork stuff, did they?

I'll call them if you don't know and maybe be able to get an inventory or something to post here

Bill

[lewism3]

I sent Tom an email regarding front and rear elastomers for my 856. This is the response:

Martin,
Thanks for the email. Sorry to inform you but we have run out of elastomers.
However we are going to try to place an order for more soon. I can not
guarantee that we will be able to get them but you may want to try us back
in January.

Thanks,
Tom B.
Iron Horse Bikes & K2 Bikes
Warranty, Customer Service & Tech. Support
tomb@ironhorsebikes.com
1-800-645-5477 ext:214

[Scott]

Change of contact for parts: Mike Lohmann mikel@ironhorsebikes.com

I just bought 2 pivot kits for my Oz and found that Tom is no longer our go-to-guy.

[mbrayf]

Just in case anybody needs to know, Rapid Decent now has mcu's in stock in most weights (but rubbish colours) http://www.rapiddescentscotland.co.uk/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=12&MMN_position=17:7

[Darryl]

Thank You !

[Willie_B]

Updated contact for parts.

johnm@worldwidecyclesupply.com