K2 / Proflex Riders Group

General => Tech Forum => Topic started by: Rederz on October 07, 2010, 01:56:39 pm

Title: Help Needed ?!?
Post by: Rederz on October 07, 2010, 01:56:39 pm

Hi wondering if any any body out there could give me some info on the bikes ive got, can't find anything on the net. had an xp6 and an xpx for a while now and looking at stripping the vector forks and rear sus down. fronts running nolees coil andf rears are girvin gdt coil overs.

Thanks

Karl

Title: Re: Help Needed ?!?
Post by: Spokes on October 10, 2010, 04:26:30 am

Have a look in the 'How To' section. All the info you need is in there. If you need any rebuild kits they are still available on ebay.
Good luck

Chris

Title: Re: Help Needed ?!?
Post by: Colin on October 11, 2010, 07:05:54 am

Hi,
I've got an XP-X, if you're not aware it's basically one of the last x56 type bikes (856 etc) just marketed in the UK.
The XP-X is one of the best IMHO.

so refer to info for "856", "World Cup Frame", "Beast", "Animal" and "657" (which was the last name this frame was marketed as.)

GDT shocks are not serviceable (as far as I am aware) ODS and Noleen ones are, but might be expensive to do.

have a dig for some of my previous posts http://idriders.com/proflex/smf/index.php?action=profile;u=284;sa=showPosts (http://idriders.com/proflex/smf/index.php?action=profile;u=284;sa=showPosts)
and in my gallery, http://idriders.com/proflex/coppermine/index.php?cat=10284 (http://idriders.com/proflex/coppermine/index.php?cat=10284)
and look at the tech docs in here http://idriders.com/proflex/tech/ (http://idriders.com/proflex/tech/) and then ask any Q's if you're stuck.

Col.