K2 / Proflex Riders Group
General => Tech Forum => Topic started by: ukreg on August 18, 2009, 12:31:30 pm
-
hey.. wanted to check in with you.. used to work for race team 95/6/7/8 and have some stuff to get moving.. suggestions please.. reg
-
Forwarded to Grimjack for his attention.
-
No reply from Grimjack, as yet. But no need really.
After some clarification, Reg has a whole load of goodies to sell potentially - 1995-1998 parts and consumables. UK based. Reg - list what you have and the prices you want, with some pics if you can ;) I'm sure you'll offload a lot of it quite quickly.
-
Here is what Reg has to offer. If anybody is interested let him know.
i have some stuff to move an amount of components for proflex/k2 from 95/6/7/8, my time with bmw proflex/k2 mastercard/k2 bike.. need to move it at least out into the open and start to move it to where it will be used.. only thing i don't have is front triangles.. have consumables, pivots, bushings, shafts, bolts, der hangers, fork parts, shocks, rear ends, and, and, and
-
Is there a contact for reg other than PM on here?
-
Is there a contact for reg other than PM on here?
What he said.
-
Yes, he has PM'd me his email address. I checked he was ok publishing it. Here are his words:
my email is ukreg {at} aol {dot} com. i don't mind giving it out it handles most bike world stuff..
I added the {} so he is less likely to get spammed.
I have recommended he puts up a list with prices. He doesn't actually live that far from me (about 25 miles) - so depending on prices etc I might snap up a load of the stuff for onward selling - but you guys have a go first.
I also modified the title of the post to reflect better what's going on. May move to the proper for sale section in due course but let's see what happens here first.
-
OK after further correspondence it appears Reg has a veritable treasure trove. I have suggested he list and price up everything here. I have said that there will be a lot of interest from you guys... at the right price, of course ;) I will probably be buying.
-
I will be buying some stuff as well, already been in email contact with him.
I'll start another thread, but I have this project running http://www.twentysixinches.com/2009/reviving-classic-proflex-855-955 (http://www.twentysixinches.com/2009/reviving-classic-proflex-855-955). The plan was to build a period bike and a modern interpretation, but if I can get the parts I would prefer two period bikes so I can take them racing again.
Hopefully reg can help and hopefully I don't miss out.
-
i would like some spare kits for (97 crosslink forks and 96 frmae kits to keep the ol girl running well into future,maybe d hanger as well.....
-
I'd love to find some extra carbon legs for Vectors and/or complete Pro-Carbon forks (956 or 957 style). I emailed Reg, but wanted to post it here as well in case there's a package-buy-and-resell.
Thanks!
- Doug :-)
-
I'm happy to buy the entire lot -- or -- will be happy to act as middleman for USA etc riders. I'm not fussed, it would be a shame for it all to be thrown out.
callum
contact me at rapid descent scotland
-
I'm happy to buy the entire lot -- or -- will be happy to act as middleman for USA etc riders. I'm not fussed, it would be a shame for it all to be thrown out.
callum
contact me at rapid descent scotland
If you need some help Callum, let me know.
Terry
-
Where is the list? Did I miss it?
Thunderchild
-
not listed in full yet - I think it's quite large - contact Reg direct on the details above ;)
-
reg been in touch - he tells me that as he gets further back in the garage - the stuff gets older. It's like an archeological dig !!
he's not going to throw anything out and also, I'm not going to stand in the way of anyone buying anything!
callum
rds
-
I could really do with a few spare ally top hats (the pivots) and the plastic concave washers that go eiter side of the dampers (front and rear) - for an 856 :)
How do I go on getting some, if available ?
WD :)
-
I could really do with a few spare ally top hats (the pivots) and the plastic concave washers that go eiter side of the dampers (front and rear) - for an 856 :)
How do I go on getting some, if available ?
WD :)
Maybe these would work, or can be modified?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170370666954&ssPageName=STRK:MEWAX:IT
-
No not them, my bad descriptions again ;D
They sit either side of the gold ods units at the top mountings to keep them central and stop them rubbing on the frame :)
-
I could really do with a few spare ally top hats (the pivots) and the plastic concave washers that go eiter side of the dampers (front and rear) - for an 856 :)
How do I go on getting some, if available ?
WD :)
I would contact Reg direct via his email address which is further up this thread.
-
Now in contact thanks :)
-
Now in contact thanks :)
reckon thats a seal spacer (part no 14612) goes either side of the shock unit in the top of the fork and on the rear strut too..
-
hi
is there a list of available parts?
after bits for a 757 and a 5500
pivots, bushings, seals, girvin fork kits, shocks.rear mech hangars etc
cheers
john
-
hi all.. reg is away from 9 through 22 sept. not sure about connection. please bear with me and know that i am not ignoring you!! reg
-
Hello, are there any 1996 Proflex 856 parts to be had. I am looking for a set of bushings and a complete set of bolts for the rear swing arm. I had a bolt snap on my rear suspension and am currently out of commission. :( Also need a right and left Pivot Axle
-
I would guess yes, but Reg is away until 22nd Sept...
-
any news on these parts and prices
thxs
john
-
try and get back in touch with Reg - he should be back by now.
-
Hi,
Has anyone heard from Reg since his return ?
Hope all is OK …
Cheers,
WD :)
-
have you tried emailing him?
-
Yes - email comunication was top notch until recent, that's why I was a bit concerned ...
-
Hi,
Has anyone heard from Reg since his return ?
Hope all is OK …
Cheers,
WD :)
Not me :-( But maybe it's a good thing since I've sent so much cash to Terry recently ;-)
-
Not me :-( But maybe it's a good thing since I've sent so much cash to Terry recently ;-)
(http://i302.photobucket.com/albums/nn94/acetyler26/crackhead.jpg)
-
I've tried to contact him recently without sucess.
Well, I need a x57 strut... If anyone has a spare one that and is able to sell it, please give a ring.
-
Not me :-( But maybe it's a good thing since I've sent so much cash to Terry recently ;-)
([url]http://i302.photobucket.com/albums/nn94/acetyler26/crackhead.jpg[/url])
LOL :-) Nice!
-
hi guys.. my apologies for the time out.. my internet at the house took a shit while i was away and still is not fixed.. have acquired one of them there dongle things and it kinda works all except for the time when i usually sort my email out.. please bear with me it is painfully slow..
thanks for concern, all is well and will be moving through the requests..
reg
-
Love the description of what happened to your internet ;D
Glad all is OK and speak soon :)
-
Hi Reg.
I e-mailed you days ago.
Waiting for your answer as soon as you can. :P
-
hi all, 2 dongles later, change that to exasperatingly slow.. i have been anwering emails, should you have sent me an email and still had no answer by the weekend (17-18) please re-send. my patience which normally allows me to out wait the average oyster is being severely tested currently..
thanks for your patience.. reg
-
Anyone heard from Reg in a while ? We had a few emails going but I fear his net connection has taken an early bath again ... ! ;D