K2 / Proflex Riders Group
General => Tech Forum => Topic started by: sammydog on November 15, 2008, 09:52:06 pm
-
I’m about to get a 757 frame (with nr1, crosslink fork and a spare set of Judy100’s with Englund Air Cartridge) that will join the 955 and 855 in the Proflex stable.
My question is, will a carbon swingarm from a 957 (my friend has a spare one) drop onto this frame?
Not sure I want to make the 757 a hybrid frame by putting the carbon arm on, but the thought crossed my mind.
-
would think so,the frames sould be identical...unless the 957 was different to the 857 and 757
-
I’m about to get a 757 frame (with nr1, crosslink fork and a spare set of Judy100’s with Englund Air Cartridge) that will join the 955 and 855 in the Proflex stable.
My question is, will a carbon swingarm from a 957 (my friend has a spare one) drop onto this frame?
Not sure I want to make the 757 a hybrid frame by putting the carbon arm on, but the thought crossed my mind.
If you put a carbon swingarm on, it will become an 857 ;D Yes, should be a direct swap.
-
I’m about to get a 757 frame (with nr1, crosslink fork and a spare set of Judy100’s with Englund Air Cartridge) that will join the 955 and 855 in the Proflex stable.
My question is, will a carbon swingarm from a 957 (my friend has a spare one) drop onto this frame?
Not sure I want to make the 757 a hybrid frame by putting the carbon arm on, but the thought crossed my mind.
If you put a carbon swingarm on, it will become an 857 ;D Yes, should be a direct swap.
And it will become more confortable.
I did that on my Animal (it has the same frame as the 757) and the difference is noticeable. I dont feel the small vibrations anymore.
-
Excellent, thats what I was thinking was the case, but its good to have it confirmed.