K2 / Proflex Riders Group

General => Tech Forum => Topic started by: The Mont on September 06, 2008, 06:31:01 am

Title: Parts req
Post by: The Mont on September 06, 2008, 06:31:01 am

Hi I'm rebuilding my Proflex Beast and I'm in need of a few parts

the bike is a 1997 Proflex Beast GDT, the one with chrome Girvins,yellow coil springs and ODS shocks front and rear
spec as per this link
http://www.bikepedia.com/QuickBike/BikeSpecs.aspx?ItemID=62072&Type=bike

I especially need
Girvin AL Fork
RH and LH rear pivot axles, bearings / bushes and O rings.
8 speed SRT-600 gripshifts and a RH (rear ) Magura HS11 brake (red) with the lever.

Plus other original spec parts if in very good condition,
such as bars, handlebar extensions,wheels, etc

Title: Re: Parts req
Post by: Colin on September 15, 2008, 03:47:50 am

Hi,
I can help you out with a RK002 World Cup Frame rebuild Kit.
Which consists of:
4 Bearings (Lower strut)
2 Bearings (Main Pivot)
2 O rings (Outer)
2 O rings (Inner)
1 tube of "Girvin Goo" lube

(http://idriders.com/proflex/coppermine/albums/userpics/10284/RK002-856_Pivot_Seals_Bearings.JPG)

Your profile says you're in the UK, so that's £15 plus £2 P&P

PM me for bank details for a transfer or address to send me a cheque, or £1 extra if you pay by Paypal please.

Thanks
Colin S