K2 / Proflex Riders Group
General => Tech Forum => Topic started by: Carbon_Angus on August 26, 2008, 12:24:53 pm
-
i am fiding my arse needs the extra and i want to keep it 24 speed
-
Shimano made an STX-RC model in 8speed 11-34, back in the 90s.
Action Tec, and Cycle Dynamics make a 34 up to 38 cogset. You could buy just a 34 or bigger, and remove a cog from your existing set, you have it. You will have have to machine a tad off your carrier if you are using that type. Any machine shop can chuck in a lathe and trim off.
What cogset are you now running?
-
trouble is with these big cogs is you get big jumps in the ratios...
-
trouble is with these big cogs is you get big jumps in the ratios...
My wife's 957 has the big jump on the 34th cog. It shifts just fine.
-
I run a Shimano HG40 "Megarange" 11-34 8 Speed on my 4000se. (22/34/44 on front).
(http://www.wiggle.co.uk/images/shimano%20hg40%20cassette.jpg)
That's pretty low end Shimano kit, "Acera" I think, and I was a bit loath to put one on my XT spec'd bike, but it has always worked well and changed quickly (even the last "big" jump) and wore very well as well, and finally, they're very cheap! (£13!)
I guess I'd probably not notice the difference using a 11-32 HG50 STX-RC cassette, so maybe I'll try one of them next.
Col.
-
Shimano made an STX-RC model in 8speed 11-34, back in the 90s.
Action Tec, and Cycle Dynamics make a 34 up to 38 cogset. You could buy just a 34 or bigger, and remove a cog from your existing set, you have it. You will have have to machine a tad off your carrier if you are using that type. Any machine shop can chuck in a lathe and trim off.
What cogset are you now running?
the 10 year-old XTR with a 28 as the largest
-
Shimano made an STX-RC model in 8speed 11-34, back in the 90s.
Action Tec, and Cycle Dynamics make a 34 up to 38 cogset. You could buy just a 34 or bigger, and remove a cog from your existing set, you have it. You will have have to machine a tad off your carrier if you are using that type. Any machine shop can chuck in a lathe and trim off.
What cogset are you now running?
the 10 year-old XTR with a 28 as the largest
Wow, 28 tooth. I would die pushing that one. Why not a 32 tooth. There are tons of SRAM ones cheap.
-
Here's what looks like an HG40 11-34 on eBay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250287894502&ssPageName=ADME:B:SS:GB:1123 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250287894502&ssPageName=ADME:B:SS:GB:1123)
(http://i24.ebayimg.com/02/i/001/01/9a/a977_1.JPG)
Maybe a trifle expensive...?
Col.
-
Here's what looks like an HG40 11-34 on eBay
[url]http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250287894502&ssPageName=ADME:B:SS:GB:1123[/url] ([url]http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250287894502&ssPageName=ADME:B:SS:GB:1123[/url])
([url]http://i24.ebayimg.com/02/i/001/01/9a/a977_1.JPG[/url])
Maybe a trifle expensive...?
Col.
Well, there ya go!