K2 / Proflex Riders Group

General => Tech Forum => Topic started by: LooseNut on November 14, 2006, 01:49:45 am

Title: My 756 rear air shock adapter
Post by: LooseNut on November 14, 2006, 01:49:45 am

I can't seem to put image tags in so pics are here!
http://hostdub.com/LooseNutz_album03

Title: Re: My 756 rear air shock adapter
Post by: Colin on November 14, 2006, 02:09:33 am

Nice solution for the Cone Adaptor x56 series bikes !!

Why two bolts through the adaptor to the Fox shock? surely it's only got one hole if it's an "I2I" model?

p.s. what i2i length did you use?

Title: Re: My 756 rear air shock adapter
Post by: shovelon on November 14, 2006, 02:21:46 am

Hey, that is pretty good.

Terry

Title: Re: My 756 rear air shock adapter
Post by: LooseNut on November 14, 2006, 03:19:48 am

The shock was originally made for the not so common AMP/Titus Racer X circa 2001-2002.  It is a 2 bolt design on the bottom end (not a single eyelet).  Found it new on ebay and picked it up for real cheap because of how rare it is.  I am currently removing material from the adapter so it doesn't look so bulky. It's plenty strong as is.  The resting eye to eye length was kept the same as the original coil over set-up.  Works great, is lighter than stock and reduces the pogo effect.