K2 / Proflex Riders Group
General => Tech Forum => Topic started by: jimbo on July 11, 2006, 12:03:41 pm
-
Found this at MTBR. Cool way to tie.
http://forums.mtbr.com/attachment.php?attachmentid=176578&stc=1&d=1151247655
http://forums.mtbr.com/attachment.php?attachmentid=176577&stc=1&d=1151247648
http://forums.mtbr.com/attachment.php?attachmentid=176576&stc=1&d=1151247641
(http://forums.mtbr.com/attachment.php?attachmentid=176578&stc=1&d=1151247655)
(http://forums.mtbr.com/attachment.php?attachmentid=176577&stc=1&d=1151247648)
(http://forums.mtbr.com/attachment.php?attachmentid=176576&stc=1&d=1151247641)
-
can't see any images...
-
me neither
-
can't see any images...
Sorry about that. I guess you can't link from MTBR and right now you can't up load files to this forum. I modified it so you can go to the link and see the pictures.
-
I could see all the pic's
but now you've taken them away ???
Simon.
-
I could see all the pic's
but now you've taken them away ???
Simon.
me thinks you have to be looged in there at MTBR to see the images.
-
me thinks you have to be looged in there at MTBR to see the images.
Tried that but still no pic's on this site (though I had previously seen them on mtbr) just little red X's now.
Bill any idea how can I upload a pic from my PC to a new topic,always put a pic into my gallery first,
thanks.
Simon.
-
Simon,
You could post on another non-member access site or photo site with a link to it, I think.
http://imageshack.us/
Bill
-
Simon,
You could post on another non-member access site or photo site with a link to it, I think.
[url]http://imageshack.us/[/url]
Thanks Bill I'll look into that.
Simon.
-
i cant get the buttons to work for the image, ive hosted a few pics on photobucket and can get them on some sites but not this one. i hope the gallery pics havent gone forever as there were some in mine i dont have copies of anymore
-
I clicked on the MTBR links and was prompted to log in to mtbr. I logged in and the pictures downloaded on my computer and were viewable in the tech forum. Nice work, but a question. What was the clear piece used to section off the tie around the cable?
A trick I learned with zip ties. After being sliced open on a cut end (Matno wasn't schooled enough to stitch it yet), I started using a match to melt the sharp ends after trimming. You can see a sharp end waiting to open up skin in the picture.
Thunderchild
-
I clicked on the MTBR links and was prompted to log in to mtbr. I logged in and the pictures downloaded on my computer and were viewable in the tech forum. Nice work, but a question. What was the clear piece used to section off the tie around the cable?
A trick I learned with zip ties. After being sliced open on a cut end (Matno wasn't schooled enough to stitch it yet), I started using a match to melt the sharp ends after trimming. You can see a sharp end waiting to open up skin in the picture.
Thunderchild
Ah where I used to work it was nothing for me to of used 100 to 200 cable ties a day,
we used flush cut side cutters, they cut the tail off perfectly flush so no risk of those nasty cuts,still got
a couple of pairs at home,quess what I use them on,
another trick I've used is double loop cable ties,you
first loop around whatever you attaching something
to first and pull tight then you loop around whatever you are attaching to it with the excess tail you have left this fitted into another slot next to already used slot,
would post apic if I could.
Simon.
-
Now thats Tidy
-
Nice work, but a question. What was the clear piece used to section off the tie around the cable? .
Thunderchild
I believe that clear tubing like aquarium tubing.