K2 / Proflex Riders Group

General => Tech Forum => Topic started by: Dan on June 23, 2006, 04:19:41 pm

Title: Help! Proflex 955
Post by: Dan on June 23, 2006, 04:19:41 pm

Help! Need to know what size of bottom bracket went on the 1995 Proflex 955. Also, any leads on where I can get a brake boss for the Vector 2 fork and new elastomer springs?

Title: Re: Help! Proflex 955
Post by: kiwi on June 23, 2006, 09:16:53 pm

my 756(855) has a 68 x110 as std but it does depend on the crank you may now be running

Title: Re: Help! Proflex 955
Post by: Simon on June 24, 2006, 10:40:45 am

Iron horse seems to be the place to start for
elastomers,
as Kiwi says 68 X 110 for the b/b though 68 X 113
has been successfully used,check your crank requirements,
when you say brake boss are you just referring to the
threaded boss that screws into the fork leg that the
canti arm pivots on  ??? if so then most LBS's should
be able to supply one,most are the same thread and
length.

Simon.

Title: Re: Help! Proflex 955
Post by: Dan on June 24, 2006, 11:49:28 am

Thanks Kiwi and Simon. I'll check the LBS for the brake bosses. Gotta get this thing back on the road.....

Title: Re: Help! Proflex 955
Post by: dan on June 25, 2006, 02:13:41 pm

Why is there next to nothing written up on a Proflex 955? I've searched and searched looking for a spec sheet and all I find is stuff for other models. Just wondering if anyone has some solid information about what components came with the 955.  

Title: Re: Help! Proflex 955
Post by: SLIM on June 25, 2006, 09:45:13 pm

 should just about cover everything you need to know ,

http://www.airfreetires.com/Specs/Step5.asp?BikeId=9693&Brand=ProFlex&Model=955&Year=1995

Title: Re: Help! Proflex 955
Post by: kiwi on June 26, 2006, 10:26:25 pm

Its an old bike now most of this info has "gone",good site simon i looked up my bike .....aeems a bit lame now but at the time I thought i was xmas.....