K2 / Proflex Riders Group

General => Tech Forum => Topic started by: gaf16 on June 19, 2006, 01:05:19 am

Title: 856 cable routing question
Post by: gaf16 on June 19, 2006, 01:05:19 am

i would like to know how any 856 owners on the forum hame routed the rear brake cable when running v-brakes.
have you routed through the hole in the seat tube, as was designed for canti's, or run it along side the seat tube?
any advice or pic's would be appreciated.
thanks.

Title: Re: 856 cable routing question
Post by: Sprucey on June 19, 2006, 01:47:43 am

Run it along the left hand side of the seat tube. You may have to use a zip tie to hold it close to the down tube to stop your feet hitting it when you pedal.

Good luck,

Sprucey

Title: Re: 856 cable routing question
Post by: kiwi on June 19, 2006, 09:33:31 pm

i used one of those pulley things so i could get rid of the noodle and run alongside