K2 / Proflex Riders Group

General => Tech Forum => Topic started by: Matno on September 17, 2005, 05:05:19 pm

Title: Swingarm mods for Swinger 3-way
Post by: Matno on September 17, 2005, 05:05:19 pm

As you can see from the pics, they're pretty minor changes. I've included a pic of the swingarm mount from the side, one that shows the clearance between the shock and the swingarm plates, one of the shock mounts that were giving me grief (see my other posting), and one of the whole shock as mounted on my 5000... As you can see, the bike is a bit dirty, but hey, it's a mountain bike!

(http://idriders.com/proflex/galleries/matno/IMGP2477.JPG)
(http://idriders.com/proflex/galleries/matno/IMGP2485.JPG)
(http://idriders.com/proflex/galleries/matno/IMGP2479.JPG)
(http://idriders.com/proflex/galleries/matno/IMGP2478.JPG)

Title: Re: Swingarm mods for Swinger 3-way
Post by: Old Proflexer on September 18, 2005, 09:59:29 am

I peeled my sticker off my fox and reinstalled it so the writing was not upside down, can you do that on a 3 way?  

- nice job.

OP

Title: Re: Swingarm mods for Swinger 3-way
Post by: Matno on September 18, 2005, 10:52:30 am

Yes, I could, but it's not worth the effort to me. The sticker literally covers the entire shock body, and I'm pretty sure it wouldn't look as good after removing and reapplying it. Stickers never seem to be quite the same. This way, I can read it over my shoulder while riding... ;)

Title: Re: Swingarm mods for Swinger 3-way
Post by: Carbon_Angus on September 18, 2005, 11:20:25 am

Thanks Matt!

....for the pics!
nice job and looks  8)


[smiley=beer.gif]
Angus