K2 / Proflex Riders Group

General => Tech Forum => Topic started by: Erick Holland on April 14, 2005, 04:56:46 am

Title: Pro Flex 5000
Post by: Erick Holland on April 14, 2005, 04:56:46 am

i need a front derailler for my K2 Pro Flex 5000. I bought the frame without the derailler so I dont know if it is top swing or what. I see that it is a bottom pull. Can someone tell me what I need. Thanks Erick

Title: Re: Pro Flex 5000
Post by: junkster on April 14, 2005, 05:18:59 am

Hi Erik,
         A Shimano Deore Mega9 top swing link dpull 34.9mm seat tube diameter. I have an 18" 5000 1998 frame. Must be the same  [smiley=nod.gif]

cheers, [smiley=beer.gif]

Dan

Title: Re: Pro Flex 5000
Post by: Erick Holland on April 14, 2005, 05:55:38 am

Thank you. i am just getting this bike together.I need brakes,shifters,seat post,bars,stem well I think thats about it.

Title: Re: Pro Flex 5000
Post by: junkster on April 14, 2005, 07:37:04 am

Hi,
   I have two seat posts, one around 150mm long, onew 250mm. The latter has been drilled (perfectly fine - very strong)  [smiley=nod.gif] but if you are interested you can have it for £5 plus postage.

I had a stem but recently sold it.

let me know

My 5000:
(http://idriders.com/proflex/galleries/junkster/k2_proflex_after_rebooted_shock_plates_april_05.jpg)
cheers,

Dan