Feed Plug Lanyards on P68SC or the like

[aaronlecain]

I am looking to see what you all have for feedplugs. I don't care for PPS speedgate but I also don't like to have to drop my feed plug. I am asking for Pics and where did you get them or how did you make them. this is my set up so far.......

[Robert_Hawker]

Well sence you asked so nicely Ill introduce you to Burtha.



Some of these pics are mid way through the build so some are unfinished.




I also have video of me fireing the beast but it also shows me playing with the feed system.
http://s31.photobucket.com/albums/c365/Robert_Hawker/?action=view&current=Pistolfiretest1.flv

[aaronlecain]

I guess I should have been more specific. I was really only looking for sheridan feed plugs but you do have a beast on your hands there. thanks for the pics.

[Have Blue]

My P68-SC has a stock feed plug, but the previous owner drilled a hole through it (lengthwise, right through the center), then threaded a string through it (looks like kevlar fishing line, actually), knotted the end on the inside face of the plug and tied the other end of the line to the pump rod.

Simple, cheap and effective - I never have to worry about losing the plug!

[aaronlecain]

I have seen that done before. it would work but isn't as professional as I would like. I have a lanyard coming and I might thread the hole in the plug to screw one end to and find a place for the other.

[thkyle]

My PGP came with that hole in the plug outof the box from the factory. I used carpet thread and looped it around the pump arm.

[Robert_Hawker]

I still think you could get away with the same thing I did just solder a tube on the side of the marker between the feed tube and the barrel to act as the pivot and slide and the rest is prety easy.